Shingar Max 100% Acrylic Exterior Wall Paints: British Paints

Shingar Max

Shingar Max is a water based 100% acrylic exterior wall finish which is suitable for dry or moderately humid climatic conditions.

Areas of application Cement Plaster, asbestos Sheet, concrete etc
Viscosity of supply 100-112 Krebs Units on Stormier Viscometer at 30Âº c.
Consistency Smooth and free-flowing.
Thinner Municipal / Potable water
Thinner ratio 75% by volume with water for each Coat.
Method of application Brush / Roller
Drying Time Touch Dry in 30 minutes. Recoating period about 4-6 hours Coverage on normal surface.
Rough cement plaster 55-65 Square Feet per Liter in two coats.
Spreading capacity 60-65 Square Feet /2 coats
Finish Smooth & matte
Shades available As per shade card
Packs available 20 Liter, 10 Liter, 4 Liter & 1 Liter

Technical Sheet

Imagine the possibilities as we’re all set to inspire creativity by putting a colourful spell on your home.

Promise of a durable performance regardless of any surface.

Cool Surface by Upto 5C (Applicable to White & Light shades only)

Preventing your walls from turning dirty green during rains.

Helping your walls stay free off fungus through all seasons.

If a home is a body, the colour is its soul. Turn any space from drab to fab with a splash of vivid shades.

Choose from the Colour Gradients Below

*Explore our categories - Dark shades varies from product to product.

TAMALE RED

Colour Code 2126C

Locate a dealer

Pick the Perfect Colour Tools to Transform your Home.

The surface to be painted should be cleaned of all loose paint, dust grease and fungus or algae growth.
Only using cement plaster should fill imperfections of surface.
Shingar Max should be applied by thinning 1 ltr of paint with 400 ml. of water with a gap of 4-6 hours between coats.
Use of Shield White Cement Based Wall Putty and Acrylic Exterior Wall Primer is recommended to set a smooth and better finish.
Shingar Max can be applied by brush or roller.

(The information given herein is given in good faith. Covering capacity is indicated on the basis of results obtained on a prepared smooth surface).