Water Proofing Shieldcrete Advanced

Home
Products
Decorative Paints
Waterproofing
British WaterProofing Shieldcrete Advanced

British WaterProofing Shieldcrete Advanced

It is a very active coatinh system based on mixture of specially modified acrylic emulsion and cement. Uses: It is used to enhance the properties of cement mortar required for new construction as well as for repair and renovation of old concrete structure.

Technical Data

Appearance Milky White Modified Acrylic Emulsion
Active Content (Wt./Wt.) 31±1%
Mixing ratio (For fillers) British WaterProofing-Britproof LW Cement - 1 Kilogram
Fine Silica - 1 Kilogram
British WaterProofing-Britproof LW Plus Shieldcrete URP - 0.5 Kilogram
Mixing ratio (For finish coating) Cement - 1 Kilogram
British WaterProofing-Britproof LW Plus Shieldcrete URP- 0.5 Kilogram
Potlife of mixed Painte 30-35 Minutes at ambient Temperature
Sp. Gravity 1.01± .01
PH 8 to 9
Coverage (as per lab application) CementBritish WaterProofing-Britproof LW PlusShieldcrete URP Kilogram / m2 two coat on concrete 0.5 0.25
Kilogram / m2 two coat on concrete 0.750 0.375

Technical Sheet

You Imagine, We Create

Imagine the possibilities as we’re all set to inspire creativity by putting a colourful spell on your home.

Excellent Washability

Dries rapidly after washing, giving your wall a refreshing look.

Inspiring Colour Palettes

If a home is a body, the colour is its soul. Turn any space from drab to fab with a splash of vivid shades.

Explore Our Catalogue

Choose from the Colour Gradients Below

*Explore our categories - Dark shades varies from product to product.

TAMALE RED

Colour Code 2126C

Locate a dealer

A Complete Colour Guide

Pick the Perfect Colour Tools to Transform your Home.

Directions For Use

It is used to enhance the properties of cement mortar required for new construction as well as for repair and renovation of old concrete structure.

Features

It provides tough and flexible surface with characteristic of water proofing
Develops strong bonding to most of the building materials
Easy application with uniform thickness
Corrosion resistant
Reduces penetration of salt / water into concrete
It provides high compressive strength / tensile strength / flexural strength to concrete / masonry
Resistant mild acid / alkali / salts
Resistant to UV radiation

Application

Concrete surface is to be cleaned to remove dust, loose materials and any other foreign deposits by method of grinding, sand blasting, water blasting, acid cleaning as suitable and approved.Concrete surface needs to be pre-wetted for minimum one hour prior to application of Shieldcrete URP. Before application water must be removed and surface should remain damp.

Any depression on surface should be filled and leveled with Shieldcrete URP fillers (based on mix as mentioned in above technical data).

For finish coat mixing ratio is to be followed as mentioned in above technical data. The mixer should be stirred thoroughly to make it free from any entrapped air bubbles and to smooth uniform consistency.

Mix is to be applied by brush on prepared surface. Surface should be made wet / damp in case of porous nature of surface.

Two or more coats are recommended. First coat is to be allowed to dry for 5-6 hours before second coat. Interval between coats 5-6 hours.

Curing

Application should be done at temperature above 10°C and below 35°C. After application of final coat, initial air drying is to be allowed for 5-6 hours, after that moist curing shall be done for the next 24 hours by periodic spraying of water.Following moist curing, the coating shall be allowed to air dry for 3 days before submission in water, if required for use.