Water Proofing Britcrete Advanced

Home
Products
Decorative Paints
Waterproofing
British WaterProofing Britcrete Advanced

British WaterProofing Britcrete Advanced

Britcrete Advanced for Repairs & Waterproofing is white liquid, useful as an additive for concrete/mortars in repair/waterproofing applications, as well as a protective coating to rebars and cementitious substrates. It also serves as a bind coat to repair sections.

Technical Data

Areas of application Waterproofing of terrace, toilets, chajja, masonry walls, slopping RCC roofs, etc. Repairs to RCC members Waterproofing mortars / concretes In repair mortars / concretes.
Total solid content 34 ± 2 %.
Specific Gravity Approx 1.00
Ph 8-9
Coverage 20-22 Square Feet / Kilogram (Britcrete URP + cement in the proportion 1:1.5)
Pot life @ 30 Degree C
Packs available 20 Kilogram, 5 Kilogram & 1 Kilogram

Technical Sheet

You Imagine, We Create

Imagine the possibilities as we’re all set to inspire creativity by putting a colourful spell on your home.

Excellent Washability

Dries rapidly after washing, giving your wall a refreshing look.

Inspiring Colour Palettes

If a home is a body, the colour is its soul. Turn any space from drab to fab with a splash of vivid shades.

Explore Our Catalogue

Choose from the Colour Gradients Below

*Explore our categories - Dark shades varies from product to product.

TAMALE RED

Colour Code 2126C

Locate a dealer

A Complete Colour Guide

Pick the Perfect Colour Tools to Transform your Home.

Directions For Use

Surface for treatments must be thoroughly cleaned of all laitance, loose material, oils, greases etc.
Mechanical means such as wire brushing, shot blasting can be used, and finally vacuum cleaned of all loose solids and liquids.
FOR REPAIRS : Mix Britcrete URP with neat cement in 1 :1.5 proportion by weight .Brush apply immediately for coating to rebars / cementitious substrates.Britcrete URP mortar must be applied when the coat is tacky . While preparing repair mortars, 24 % to 35 % of Britcrete URP must be premixed with the water being used to mix with cement .The substrate must be wet before overcoating, without excess of water over it.
The repair mortar can be easily trowel applied to the required thickness.
FOR WATERPROOFING: 2 coats of Britcrete URP + cement in the above proportion must be coated with a gap of 4 to 6 hours. Over application of mortar screed must be done when the second coat is tacky.

Precautions & Limitations

Not recommended for repairs of critical structures.
Not to be used for cathodic treatments to rebar.
Do not exceed an addition of 35 % of Britcrete URP for modifying concrete/mortars.

(The information given herein is given in good faith. Covering capacity is indicated on the basis of results obtained on a prepared smooth surface).